Why is betta fish water cloudy

Or is there other ways? Do partial water changes with the fish still in the aquarium. The trick is to avoid sucking up gravel when you deep clean a section of the substrate. Some aquarium syphons have a large diameter, rigid pickup tube connected to a much smaller diameter flexible outlet hose. The large diameter pickup tube disperses suction power enough to pick up most of the crud without picking up any gravel.

If the aquarium is small and you are using something like a half inch diameter flexible hose, slow the syphon by pinching the tube.

Please avoid removing the fish or deep cleaning all of the gravel at once. Also warm the replacement water to about the same temperature as the aquarium water, and treat it with a good tap water conditioner. Getting netted and moved is very stressful for the fish, and so are quick changes in water parameters. Thus, the entire cleaning process should be gradual, and water changes should not be too large.

If the substrate has lots of uneaten food or other waste materials, you can remove some of it using a turkey baster. Everytime i touch the gravel in the slightest it brings up loads of dirt and clouds the water instantly, I did a partial water change last night and the things you said to do, i woke up this morning and it was just as cloudy as before, Maybe i will have to use a chemical? It's the only way i can think about making this water clear again, The fish seem to be healthy and happy still, But i'm not happy with them being in that kind of water.

All i have in the tank is a Filter,Gravel,a plastic plant,Thermomiter,heater which i've always had in there so i know it's not these, 1 sucking loach, and 1 female beta fish. I've kept all kinds of fish in the past everything from Piranha's to Oscars and there messier fish than any of these two, but i've always managed to keep the water clear, so this is a mystery to me.

The cloudiness from the gravel is partially bacteria it is suppose to be there. However, I am sure some of it is dirt. Do it every couple days until it doesn't cause as much cloudiness. So if i do Partial water changes, How much water? It isn't super important the time frame of the water changes just make sure to get some of the gravel really good each time.

Just until the cloudiness stops. I have had my betta boys for over a year. Their bowls used to stay clear for a couple weeks. Now it"s a couple days and I'm changing the water. Same feeding.

I use Publix Spring water and always have.. I let it set 48 hours before changing. Not sure if you are still looking for an answer, but yesterday I was Googling for an answer to cloudy water in my Betta bowl to no avail. I have a glass vase that holds close to 2. This has worked great for over a year only doing a thorough cleaning every few weeks. I started to make up the new water in which to put Mr.

Miyagi while I scrubbed everything with hot water, and in doing so I believe I found the answer. The water conditioner had gone bad. It has white cloudy clumps floating in it and mold in the bottom of the bottle.

This was the one I bought at the pet store when I got the fish. So yesterday I used the conditioner I got at Walmart and today the water is still crystal clear. I may even call the manufacturer; they should have a "use by date" on the bottle. I called my daughter to tell her because she had the same problem.

She said she had stopped using conditioner and used only filtered water and that worked fine until I looked after her fish while they were away. I cleaned out her tank and used my conditioner. She felt like a bad fish momma for not using conditioner so went back to using it same brand that went bad on me. She is going back to filtered water.

Two days later, your poor pet has vanished into a cloudy fog! But you cycled the tank before you put your betta in there, so, how on earth can you have cloudy aquarium water? In this guide, we walk you through all the likely causes for a cloudy betta tank, and we explain how to cure the problem.

The first thing to look at is the color of the water. There are different shades of cloudy, and that can tell you what the problem is. Cloudy aquarium water that is white or grayish in color and happens right away when you fill a new tank is usually due to dirt and dust from the new substrate. All you need to do here is drain the tank and wash the gravel through in running water until the water runs clear.

If you wash the gravel, but the water is still cloudy, the problem is probably caused by high levels of silicates, heavy metals, or phosphates. Treating the tap water with a suitable water conditioner or pH buffer should solve the problem.

If your tap water is the problem, you might want to try using RO Reverse Osmosis water instead, which you can buy from your local fish store. Alternatively, you could buy a unit that creates RO water, which could save you money in the long run. Bacterial bloom happens in a new aquarium as the biological filter is becoming mature enough to cope with the influx of fish waste, uneaten food, etc.

During that break-in cycle, you may find that your fish tank water becomes a little hazy. However, the problem usually resolves by itself over a few weeks or months. In the meantime, you should keep the tank clean by getting rid of any dirt and debris and thoroughly vacuuming the substrate every week.

Also, reduce feeding your betta to every second or even third day to reduce waste food decay. If the water is still cloudy, it may be helpful to use a flocculate.

Flocculates work by causing floating particles of debris to stick together, making it easier for your mechanical filter to sieve them out of the water. Bacterial bloom can also happen if you carry out a massive water change, kicking off a mini-cycle during which the bacterial colonies in your filter media and on surfaces within the tank have to repopulate. Bacterial bloom also occurs if you turn off your filter overnight. If you feed your fish too much, that can make your fish tank cloudy, possibly due to a bacterial bloom or residual fish food particles that have dissolved in the water.

When you disturb the gravel it shoots all the built-up sediment back into the tank. This is one of the most common causes of cloudy water in a betta tank. They can also happen rapidly when you put water in your tank for the first time.

If the water conditions in your aquarium have changed then this can often cause your water to become cloudy. Once again this is because of bacteria in your tank. As the bacteria starts growing in the tank again it can cause it to become cloudy and white. If your tank has started to go a cloudy green then you probably already know what the main culprit is.

One thing that algae love is light. If your tank is in front of a window or you leave the lights in the room on, then algae can also grow because of this. This is the other requirement that algae need to grow. Phosphates can enter your tank in a number of different ways. The most common way is because of decaying food and waste. If it is then you can also buy bottled water specifically for betta tanks.

This is a very common occurrence a lot of betta owners have. One of the most common reasons is decorations in your tank. Here are a few ways you can do it! In most cases, the best thing you can do is be patient and just leave the problem to clear up on its own.

There are a lot of different cleaners and medicines that you can use, but in a lot of cases they only end up making it worse. Cloudiness is often a natural sign of a tank establishing itself. However, the only time that you should avoid just leaving it is when you know the cause. Another great step is to introduce more bacteria into the tank.

There are a number of ways you can do this. You can use an existing biological sponge from another filter to kickstart things.